Mold testing and its role in the remediation process

24 hour Emergency Services 365 Days per year

Mold testing and its role in the remediation process

November 15, 2019 Dryco Restoration Mold Mold Remediation Professional Cleaning 0
Mold samples from a source in Duluth, MN

When homeowners in Duluth suspect they may have mold in their home their first instinct is to get a mold test done. Many times this step may not be necessary or effective for identifying the source of the problem. Read on to find out if a mold test is right for your situation!

Do you see obvious visible mold?

If the mold is already visible and growing a mold test is only going to tell you what you already know, you have mold. It is usually unnecessary to get a test done in this circumstance. What you really need is a game plan to remediate the mold properly. Most mold remediation companies (including Dryco:) can perform a visual inspection. During the inspection a professional can determine the extent of the contamination and provide a remediation plan and estimate for a modest fee. Going this route will much less than getting a test for mold that you can already see. One caveat where we recommend getting a test done first is if anyone in the home has heath concerns related to mold. It may be important for these individuals to know the type of mold and concentrations in the air. The EPA also states ” Is sampling for mold needed? In most cases, if visible mold growth is present, sampling is unnecessary. Since no EPA or other federal limits have been set for mold or mold spores, sampling cannot be used to check a building’s compliance with federal mold standards. ” to read more about what the EPA recommends, click HERE.

I can smell something musty but cant see any visible mold.

In this situation testing may be more valuable, but you still need a professional to identify the source of the problem. Mold usually doesn’t grow with out a moisture source and many times a trained professional can identify the source without an actual mold test. If the source it not found by the mold remediation professional, then it is time to move on to the next step and get the area tested. Twin Ports Testing provides comprehensive tests and reports for Duluth and surrounding areas. TPT website

If I don’t need testing before remediation when is it necessary to test for mold?

The most common time that we recommend getting a mold test done is after the remediation is complete. This is called “post-remediation-verification testing”. It will ensure that the problem is taken care of completely or if there is additional hidden problems. We also recommend getting testing done in commercial settings, before selling your home, or if there are health concerns related to mold.

Can’t I just get home mold test kit and test the mold myself?

We would advise against it. Don’t take it from us though, The EPA states “Sampling for mold should be conducted by professionals. Who have specific experience in designing mold sampling protocols, sampling methods, and interpreting results. Sample analysis should follow analytical methods recommended by the American Industrial Hygiene Association.” Mold test results from DIY kits are often incorrect. The sampling and testing process is something that should be left to the professional. Even our company of mold remediation professionals leave it up to the Industrial Hygienists to provide sampling.

If you think you may need testing but aren’t quite sure, contact us today for a free phone consult! Call Now

To learn more about the remediation process and facts about mold, check out our webpage: Mold Remediation

 

Call Now